SSG5000A RF Signal Generator User Manua
l
SSG5000A User Manual 14
1.7 Parameter setting
P
arameter input can be performed through touch screen, keypad and digital keys, knob or
direction keys. This section introduces an example of three parameter setting methods by
setting the center frequency to 100 MHz.
1. Using the digital keyboard
1) Press
FREQ
;
2) Use the numeric key to input the value "100";
3) Then press
to select unit MHz;
2. Using the touch screen
1) Click the
Freq
input box on the screen to display the keypad.
2) Enter 100 on the keypad, then select unit MHz on the keypad.
3. Using the knob and the direction key
1) Bring the Focus Cursor on the
Freq
input box by using the knob.
2) Press the knob and adjust the left and right arrow keys to select the digit you wish to
adjust.
3) Then turn the knob or press the up and down arrow keys to change the parameters until
the desired value is obtained.
