SSG5000A RF Signal Generator User Manua
l
9 SSG5000A User Manual
1.4 Rear Panel
Figure 1-10 Rear Panel
1. AC power input terminal
The RF signal source can operate with AC power from 100 V - 240 V, 50/60 Hz, or 100 V -
120 V, 400 Hz. Please connect the RF signal source to the AC power supply with the
supplied power cord.
2. LAN interface
Used to link the RF signal source to the computer or computer network, the SSG5000A is
VXI-11 compliant, supports remote commands based on Socket and Telnet, and uses
WEB for remote control. It can quickly build test systems with other standard equipment.
3. USB host
The RF signal source can be used as the "main device" to connect to the external USB
device. The interface reads the data or state file from the U disk, or stores the current
instrument state or data to the U disk.
4. USB Device interface
11 10 9 8
7
6 5 4 3 2
1
