SIGLENT TECHNOLOGIES SDG800 Series, Руководство пользователя

Страница: 109 / 128

SDG800 User Manual 99
3.9. Example 9:Generate an AM Wave
Generate an AM waveform with 80% depth. The carrier is a sine wave with
10kHz frequency, and the modulating wave is a sine wave with 200Hz
frequency.

Steps:

Set the frequency, amplitude and offset of the carrier wave.
1. Press Sine , and choose the sine waveform as the carrier wave
2. Press Freq and choose Freq which will display in white color. Input
’10’
from the keyboard and choose the unit
‘kHz’ to set the frequency 10kHz
3. Press Ampl and choose Ampl which will display in white color. Input
’1’
from the keyboard and choose the unit
‘Vpp’ to set the amplitude 1Vpp.
4. Press Offset and choose Offset which will display in white color. Input
’0’
from the keyboard and choose the unit
‘Vdc’ to set the offset 0Vdc.

Set the modulation type AM and parameters.
1.
Press Mod →Type → AM, choose AM. Please notice that the message
shown on the middle left side of the screen is
‘AM’.
2. Press AM Freq, input
’200’ from the keyboard and choose the unit ‘Hz’ to
set the AM freq 200Hz.
3. Press AM Depth, input
’80’ from the keyboard and choose the unit ‘%’ to
set the AM depth 80%.
4. Press Shape
→Sine, to choose sine wave as the modulating waveform.
When all parameters above are set, the wave generated is shown in Figure
3- 9: