Sigineer Power MS6048D, Руководство пользователя

Страница: 31 / 48

www.sigineer.com
29
3 Installation
3.1 Location
Follow all the local regulations to install the inverter.
Please install the equipment in a location of Dry, Clean, Cool with good ventilation.
Working temperature: ‐10℃ to 55℃(14℉ to 131℉)
Storage temperature: ‐15℃ to 60℃(5℉to 140℉)
Relative Humidity: 5% to 95%
，
non-condensing
Cooling: Forced air
Warning! Operation in a condensing environment will invalid warranty.
3.2 Unpacking and Inspection
Before installation, please inspect the unit. Be sure that nothing inside the package is damaged. You should
have received the following items in the package:
*The inverter x 1
*User manual x 1
*Communication cable x 1
*Current sharing cable x 1
*Parallel communication cable x 1
Mounting the Unit
Before connecting all wiring, please take off bottom cover by removing two screws as shown below.
Consider the following points before selecting where to install:
Do not mount the inverter on flammable construction materials.
Mount on a solid surface
Install this inverter at eye level in order to allow the LCD display to be read at all times.
The ambient temperature should be between 0°C and 55°C to ensure optimal operation.
The recommended installation position is to be adhered to the wall vertically.
Be sure to keep other objects and surfaces as shown in the right diagram to guarantee sufficient heat
dissipation and to have enough space for removing wires.
SUITABLE FOR MOUNTING ON CONCRETE OR OTHER NON-COMBUSTIBLE SURFACE.
If it is mounted to a wood or metal surface, please take precaution on the electrical safety and fire
prevention.
Install the unit by screwing the six sets of screws.
Install the unit by screwing three screws. It’s recommended to use M4 or M5 screws.
Note: For proper air circulation to dissipate heat, allow a clearance of approx. 20cm to the side and approx.
50 cm above and below the unit. Be sure to install each unit in the same level.