manualshive.com logo in svg

Sigineer Power M12048D, Руководство пользователя

Поделиться
Скачать
Sigineer Power M12048D Скачать руководство пользователя страница 25

                                                                                                                                            www.sigineer.com 

25 

Standby mode 
Note: 
*Standby mode: Inverter 
power off, solar charger 
activated, utility charger 
disabled.   

In standby mode, the PV 
power only charges 
batteries, the inverter will 
not invert DC to AC. 

Utility charger is disabled, only PV can 
charge batteries. 

 

Line Mode 

Utility power is designated 
to power loads and solar is 
designated to charge 
batteries. 

Charging by PV energy 

 

 

The unit will provide AC 
output power from the 
utility. It will also charge the 
battery in line mode. 

Charging by utility 

 

Battery Mode 

The unit will provide AC 
output power from battery 
and PV power. 

Power from battery and PV energy. 

 

 

Power from battery only. 

 

 
The inverter is built with automatic PV and utility power wakeup feature. 

⚫

 

When the power switch is in power off, and qualified PV input, the PV charger will be activated, and 
the rest part of the inverter will remain powered off. In this mode, the utility power can only illuminate 
the LCD, it can’t charge batteries. 

⚫

 

When the inverter shuts off due to low battery voltage, and the switch is kept on “on” position, the 
inverter will use qualified utility power or PV power to charge batteries and wake up at “cold start 
voltage” to discharge the battery to provide AC output. 

⚫

 

If the inverter is set in SOL or SUB, the automatic wake up feature will charge battery close to “Utility 
to Battery switch” voltage, and then cut off utility charger, switch to DC to AC model. 

 

2.4.8 Audible Alarm 

The inverter also gives audible alarms when the following situations occur. 

Warning 

Buzzer beeps 0.5s every second. 

Error 

Long Beep. Beeps 0.5s every 1s for 10s, shut off, then long beep for 60 seconds. 

 

2.4.9 FAN Operation 

For M Series 4-6KW models, there are one DC fan and one AC fan. 

Содержание M12048D








































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды