Sigicom INFRA Point, Руководство пользователя

Страница: 35 / 58

INFRA MASTER
Copyright © Sigicom AB 2003-2013 35
6 Operation
6.1 User Interface
LCD/F1 [F1] can be used to exit the change mode or to cancel an ongo-
ing change. Press [F1] to turn the LCD ON. Hold [F1] for 3 s to
turn OFF the LCD display (only from main menu).
[UP] is used to search for the proper setting.
[DOWN] is used to search for the proper setting.
If not in change mode, [DOWN] is used to go to the next
menu.
F2 [F2] is used to select a menu, go into change mode or to save
new setting.
Indicates GSM function is running.
Indicates low battery level.
When flashing it indicates that data registration is active.
When lit it indicates that data is transferred from sensor(s).
Comm
Lo Batt
Reg On
NOTE
Most settings can only be changed in REG OFF mode.
Comm
Lo. batt
Reg. On
LCD
F1
F2
RS-232