Sigicom 080-02850-0, Руководство пользователя, Страница: 25 / 36

Copyright ©Sigicom AB 2003-2014
23
5 Consider this

The S50 Sound Level Meter can be used and stored in a
wide range of temperature. However, allow the S50 Sound
Level Meter ample time to adjust to abrupt temperature
changes.

Don’t expose the S50 Sound Level Meter for environmental
conditions worse than IP66. NOTE! The microphone must
not be submersed.

Whenever the S50 Sound Level Meter is shipped, care
should be taken in repackaging it with the original factory
provided packaging.

S50 shall never be subjected for sound pressure levels
above 146 dB. Note that maximum measured sound
pressure level if the S50 is 131 dBA/dBC (sinusoidal)

The operating temperature range is –20 ºC to + 50 ºC.

Wind blowing across the microphone will introduce
additional noise. Use the included windscreen to prevent
undesirable wind noise to be added to the measured signals.

The sensor cables supplied by Sigicom are designed to
work properly with the system. Please don’t use other types
of cables.