ICD-4000-OEM
© SightLine Applications, Inc.
1
1
Overview
Describes power requirements, thermal management, interface specifications, and connector pinouts
for the 4000-OEM video processing board.
CAUTION:
Any customer modifications to SightLine OEM and adapter boards will void the warranty and can
potentially damage the board. Before attempting any modifications, please contact
1.1
Additional Support Documentation
Additional Engineering Application Notes (EANs) can be found on the
SightLine Applications website.
The
provides a complete overview of settings and dialog windows located in the
Help menu of the Panel Plus application.
The Interface Command and Control (
) describes the native communications protocol used by the
SightLine Applications product line. The IDD is also available as a PDF download on the
page under Software Support Documentation.
1.2
Sightline Software Requirements
Panel Plus software and firmware versions:
4000-OEM requires Panel Plus and Firmware 3.0.0 and higher.
IMPORTANT:
The Panel Plus software version should match the firmware version running on the
board. Firmware and Panel Plus software versions are available on the
2
Safe Device Handling
CAUTION:
To prevent damage to hardware boards, disconnect the power before connecting or disconnecting cables
including all FFC, FPC, KEL, HDMI, MIPI, and round wire (Molex) cables.
CAUTION:
To prevent damage to hardware boards, use a conductive wrist strap attached to a good earth ground.
Before picking up an ESD sensitive electronic component, discharge built up static by touching a grounded bare
metal surface or approved antistatic mat.
3
4000-OEM Overview
The 4000-OEM has 11 connectors and one microSD card slot. Connectors are used to connect power,
Ethernet, Serial ports, MIPI input, HDMI output, USB3, and digital video in (with the use of a 3000-
adapter board).
Figure 1: 4000-OEM Overview
