EAN-FLIR Cameras
© SightLine Applications, Inc.
3
•
Reference the
ICD-OEM-Camera Side Interfaces
video processing boards to the Tau through the FPC interface boards.
•
The 1500-OEM can also be connected directly to the back of the Tau camera through the J4 50-pin
connector.
•
On some Tau cameras there can be a conflict when switching to analog video (
Analog 0
and
1
). See
•
The 1500-OEM will supply 5V DC power to the Tau. As the Tau powers up, it will perform a Non-
Uniformity Correction (NUC) with the internal mechanical paddle. This action will make a
noticeable sound. Status lights on Tau camera will illuminate.
The Tau to 1500-OEM direct connection requires additional hardware prerequisites. Contact
for questions regarding direct connection options.
3.2
3000-OEM Tau Camera Bench Setup
Interface and adapter boards:
•
: Tau camera and SLA-3000-FPC interface.
•
interface. Provides serial and network interfaces. The
3000-OEM supplies power to the camera through the SLA-3000-FPC board.
•
: Provides serial and network interfaces. Adapter boards can be connected to one of
two available video input connectors (VIN1 or VIN0). See the 3000-OEM
drawing for more connection layout information.
VIN0 has camera channels 0 and 1 assigned. VIN1 has camera channels 2 and 3 assigned. If the
configuration includes an analog board with a digital adapter board the analog board must be
installed on VIN0.
•
(optional smaller IO board): Provides serial and network interfaces. This board
allows SLA-3000-FPC board to be connected directly to the OEM board.
Cable connections:
•
SLA-CAB-FPC04: Connects to the SLA-3000-FPC board and to the Tau camera. Provides serial
communication and digital video to the camera. See
•
SLA-CAB-0403: Connects to J4 on SLA-3000-mIO board. Provides an RJ45 Ethernet connection.
•
SLA-PWR-C12V (110-250VAC input / 12VDC output): Connects to J5 on SLA-3000-IO board.
•
SLA-CAB-1504 / SLA-PWR-B12V (110-250VAC input / 12VDC output): Connects to J9 on the SLA-
3000-mIO board.
