SightLine 1500-0EM, Быстрый старт

Страница: 5 / 8

EAN-DRS-Cameras
© SightLine Applications, Inc. 4
3000-OEM SLA-3000-IO Serial Port Camera Index
Panel Plus
J1 0/1
NA
J2
VOUT
4
NA
J3 VIN0 2
CAM0/CAM1
J4 VIN1 3
CAM2
Figure 4: 3000-OEM Serial Port and Connector Reference
4.3 4000-OEM DRS Camera Bench Setup
See EAN-Camera-Compatibility for the complete list of supported DRS cameras.
Interface and adapter boards:
•
SLA-3000-FPC : DRS camera and 4000-OEM interface. The 4000-OEM supplies power to the camera
through the SLA-3000-FPC board. Serial and network interfaces are provided on the 4000-OEM
board.
•
The SLA-3000-FPC board can be connected to J6 on the 4000-OEM. Additional camera adapter
boards can be connected using the SLA-4000-MIPI board on J9. See the
ICD-3000-4000 Adapter
Boards for specific MIPI board power requirements.
Cable connections :
•
SLA-CAB-FPC04: Connects to the 3000-FPC board and to the DRS camera. Provides serial
communication and digital video to the camera. See
FFC cable instructions and precautions.
•
SLA-CAB-0403: Connects to J4 on the 4000-OEM board. Provides an RJ45 Ethernet connection.
•
SLA-CAB-1504 / SLA-PWR-B12V-36W (110-250VAC input / 12VDC output): Connects to J50 on the
4000-OEM board.
Power and network connectivity LEDs:
A green light (D1) on the 4000-OEM board indicates that all boards are powered on. An amber light
(D5) verifies network connection.
Figure 5: 4000-OEM AGS-720p Camera Bench Setup
* SLA-CAB-MIPI-02 FFC cable must be connected correctly. See FFC cable instructions before connecting the SLA-4000-MIPI board.
** SLA-CAB-0305 can connect to SLA-CAB-0804 to facilitate a PC/USB connection to serial port 0 on the 4000-OEM. See the Serial
Communications section in the EAN-Startup-Guide-4000-OEM for more information .
J1-Serial Port 0/1 J2-Serial Port 4
J4/VIN1-Serial Port 3
J3/VIN0-Serial Port 2
Network Switch or
PC Direct
SLA-CAB-1504 (J50)
Serial (SLA-CAB-504)
SLA-CAB-0403 (J4)
4000-OEM +
SLA-3000-FPC
Optional
SLA-4000-MIPI Board
RJ45 Ethernet
SLA-PWR-B12V-36W
SLA-CAB-0804 (J25
(J6)
SLA-CAB-FPC04
*
SLA-CAB-MIPI-02 (J9)
DRS Camera
SLA-FPC-DRS

IMPORTANT: Disconnect all input power
to OEMs and adapter boards before
connecting or disconnecting cables.
** USB to Serial SLA-CAB-0305 (optional)

Contact
surface facing
down when
inserting.