Your kit contains the following parts. Please check your kit for any missing or damaged parts before starting construction.
COMPLETE KIT PARTS LIST
1
Plan Sheet
1
Decal Sheet
2 White Tissue
1
Red Tissue
1
1/16"x12" Landing Gear Wire
3 6"x3 1/4" Windshield Plastic
16 1/16" sq. x18" Balsa Strip
18 3/32" sq. x18" Balsa Strip
2 1/8" sq. x18" Balsa Strip
6
3/32"x1/4"x18" Balsa Strip
1
3/16"x1 3/4" Birch Dowel
2 1/2"x3/4"x4 3/4" balsa wing tip block
1
Tail Wheel Assembly
1
Instruction Manual
1 Molded Plastic Propeller
1
Propeller Shaft
2
Brass Washer
1 Nylon Propeller Bearing
2
Plastic Wheels
1
3/16"x60" Rubber Strip
2 Plastic Wheel Retainers
5
Laser Cut Sheets
Tools and Building Supplies
You will need the following items to assemble this model. You must read and follow all of the manufactures
instructions provided with these items!
-Glue
CA, White Glue, Sigment or Ambroid all work well.
-Cutting Tools
A hobby knife with a #11 blade is used for general cutting. A single edge
razor blade is also a useful cutting tool.
-Clear Dope, Thinner & paint brush
-320 and 400 grit sandpaper
-Straight Pins
-Wax Paper
-Needle nose pliers
-1/4" Drill Bit
-Building Board
