Figure 6:
ATX Connection
Note
Care must be taken not to excessively flex the board when connecting or disconnecting the
ATX Power Connector. Note that the figure above is from the first version of the board.
Later versions of the fan header position the red cable on the left and the black cable on
the right.
Then, connect USB to microUSB cable to the microUSB connector (see
2
in Figure 1).
The HiFive Unmatched kit comes packaged with a preloaded microSD card. Connect this
microSD card to the microSD card slot (see
1
in Figure 1).
3 Board Setup
HiFive Unmatched Getting Started Guide
© SiFive, Inc.
Page 11
