SIFCOTechnoPlate Power Pack_2019-05-06_V1.5_e.doc
32/68
plating electronic GmbH - Rheinstraße 4 - D-79350 Sexau - Germany
Tel.: +49 (0)7641 / 93500-0 - Fax.: +49 (0) 7641 / 93500-999 E-Mail: [email protected]
17.1.2
Function 2 “Jumping”
By pushing the potentiometer, you will enter the digit selection mode.
With each push, you move the digit selection from right to left.
The starting point is the digit position that was selected the last, or, after
a restart of the control unit, the rightmost digit.
The movement of the digit selection is done in a loop.
00.0
0
V
one digit to the left
00.
0
0 V
one digit to the left
0
0
.00 V
one digit to the left
0
0.00 V
back to rightmost digit
push 1 x to
select digit
push 1 x to
select digit
push 1 x to
select digit
