Sievert Crane & Hoist Little Mule 105SB, Руководство по эксплуатации, техническому обслуживанию и каталог запасных частей

Страница: 5 / 12

4
Country Club Road
P.O. Box 779
Wadesboro, NC 28170 USA
TEL: (800) 477-5003
FAX: (800) 374-6853
IIN NS SP PE EC CT TIIO ON N A AN ND D M MA AIIN NT TE EN NA AN NC CE E C CH HE EC CK K L LIIS ST T
L LE EV VE ER R O OP PE ER RA AT TE ED D C CA AB BL LE E H HO OIIS ST T
Type of Hoist ______________________________________________________ Capacity (Tons) ____________________________________________
Location _________________________________________________________ Date Placed in Service ______________________________________
Manufacturer______________________________________________________ Manufacturer’s Serial No._____________________________________
Normal Service Heavy Service Severe Service
Item Visual Record Visual Record Visual Record
Monthly Yearly Weekly 6 Months Daily Monthly Remarks
FREQUENT INSPECTION
All functional * * *
mechanisms for
proper operation
Hooks and latches for * * *
deformation, chemical
damage, cracks & wear
(See ASME B30.10)
Hook latch operation * * *
Cable/Wire Rope (See * * *
Wire Rope Inspection)
Levers for bends, * * *
cracks, etc.
Hoist support for damage * * *
PERIODIC INSPECTION
Evidence of loose pins, ** *** ***
bolts, nuts or rivets
Evidence of worn, ** *** ***
corroded, cracked or
distorted parts such
as suspension frame,
levers, cable
attachments, yokes,
shafts, pins and
rollers
Evidence of damage to ** *** ***
hook retaining nuts
and pins
Evidence of worn pawls, ** *** ***
cams or ratchet;
corroded, stretched or
broken springs
Warning label ** *** ***
End connections of ** *** ***
wire rope
NORMAL SERVICE - Weekly usage
HEAVY SERVICE - Daily usage
SEVERE SERVICE - Daily usage and/or in severe weather conditions (rain, snow, ice, etc.)
NOTE: All hoists are load tested at 125% of the rated capacity at the manufacturer. If load sustaining parts are altered, replaced
or repaired, the hoist must be load tested at rated capacity. This inspection and maintenance check list is in accordance with
our interpretation of the requirements of the Safety Standard for Manually Lever Operated Hoists ASME B30.21. It is, however,
the ultimate responsibility of the employer/user to interpret and adhere to the applicable requirements of this safety standard.
Figure 4 — Recommended Inspection and Maintenance Check List
* Visual inspection by operator or other designated personnel.
** Visual inspection by designated person of conditions.
*** Visual inspection by designated person of conditions unless conditions indicate that disassembly should be done to permit detailed inspection.
For more information contact: Sievert Crane and Hoist, (708) 771-1600, parts@sievertelectric.com, www.sievertcrane.com