Operation and Configuration Guide 3.14
54
4118618
To Modify an Existing Administrator
1.
Navigate to Security > Users.
2.
Locate a user to modify in the list at the bottom and click Edit in the Action
column.
3.
Modify the User Name and/or Password fields.
4.
Click Edit User to save the changes.
To Delete a User
1.
Navigate to Security > Users.
2.
Locate a user to modify in the list at the bottom and click Delete in the Action
column.
3.
Click OK when prompted to confirm the deletion.
11.4 Changing the Root Password
Remote administration access on the oMG is controlled using a root password
which is defaulted to the oMG's serial number.
If another password is used, password entry may be required when accessing the
unit through an AMM. Consult with Sierra Wireless Technical Support before
changing the password to ensure that Sierra Wireless can continue to provide
remote administration support.
The root password for the oMG can be changed by navigating to
Security > Change Root Password in the oMG's LCI and then entering both the
old and new root passwords:
Figure 11-4: Security Screen for Changing the Root Password
Note: In the event that the root password is lost, it cannot be recovered except by
restoring the serial number as a password through a factory reset of the oMG.
11.5 Backing up and Restoring
Configuration Settings
The oMG’s configuration can be backed up and restored directly from the LCI.
Navigate to General > Backup/Restore to display the Backup/Restore
Configuration screen: