Sierra Wireless oMG series Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 101

Sierra Wireless oMG series Скачать руководство пользователя страница 3

Preface

Rev 4 May.17

3

4118618

Patents

This product may contain technology developed by or for Sierra Wireless Inc. This
product includes technology licensed from QUALCOMM

®

. This product is

manufactured or sold by Sierra Wireless Inc. or its affiliates under one or more
patents licensed from InterDigital Group and MMP Portfolio Licensing.

Copyright

© 2017 Sierra Wireless. All rights reserved.

Trademarks

Sierra Wireless

®

, AirPrime

®

, AirLink

®

, AirVantage

®

and the Sierra Wireless logo are

registered trademarks of Sierra Wireless, Inc.

Windows

®

and Windows Vista

®

are registered trademarks of Microsoft Corporation.

QUALCOMM

®

is a registered trademark of QUALCOMM Incorporated. Used under

license.

Other trademarks are the property of their respective owners.

Contact
Information

Revision
History

Sales information and technical
support, including warranty and returns

Web:

sierrawireless.com/company/contact-us/

Global toll-free number: 1-877-687-7795

6:00 am to 6:00 pm PST

Corporate and product information

Web:

sierrawireless.com

Revision
number

Release date

Changes

1

May 2016

Imported content from oMG-ED-121006 r4.9

Added topic

Accessing the Console

Updated MTBF

2

September 2016

Added Pilot Ping field to WAN Configuration screens

Added

Configuring DNS Zones for Private DNS Server Use

and updated Automatic

DNS field descriptions

Noted removal of Wi-Fi channels to comply with FCC rules

Noted special character restriction for Pre-Shared Key format

Updated Server List format for Remote Forwarding

3

January 2017

DFS channels re-enabled, so removed rev2 note concerning removal of Wi-Fi
channels.

4

May 2017

Replaced ‘oCM’ and ‘oMM’ references with ‘ACM’ and ‘AMM’

Updated section NMEA Messaging ‘Additional Options’—changed label for ESN
option, added option to group sentences

Updated Auto Software Updates options

«
1
2
3
4
5
...
»

Содержание oMG series






































































































Отзывы:

Нет отзывов