Sierra Wireless MP 700 Series, Справочник по командам

Страница: 76 / 118

MP 700 Series GPS AT Command Reference
74 2130309
+CLCK=<fac>,
<mode>
[,<passwd>]
[,<class>]
+CLCK=?
Facility lock
Locks, unlocks, or interrogates the modem or a network facility specified in
<fac>
.
+CLCK=?
returns a list of supported
<fac>
s.
Supported values
<fac>
values include:
SC
SIM, lock SIM Card. The SIM requests a password when the command is issued
or when the modem is powered on.
AO
BAOC, Barr All Outgoing Calls—see GSM 02.88[6] clause 1
OI
BOIC, Barr Outgoing International Calls—see GSM 02.88[6] clause 1
OX
BOIC-exHC, Barr Outgoing International Calls except to Home Country—see
GSM 02.88[6] clause 1
AI
BAIC, Barr All Incoming Calls—see GSM 02.88[6] clause 2
IR
BIC-Roam, Barr Incoming Calls when roaming outside the home country—see
GSM 02.88[6] clause 2
AB
All Barring services (see GSM 02.30[19])—applicable only when
<mode>=0
)
AG
All outGoing barring services (see GSM 02.30[19])—applicable only when
<mode>=0
)
AC
All inComing barring services (see GSM 02.30[19])—applicable only when
<mode>=0
)
PN
Network Personalisation (see GSM 02.22[33])
<mode>
specifies whether to lock, unlock, or query:
<mode>=0
to unlock,
<mode>=1
to lock, and
<mode>=2
to query the lock status.
When
<mode>=2
, a successful query returns each class on its own line:
+CLCK: <status>,<class>
where
<status>
is either
0
(not active) or
1
(active).
<passwd>
is a string password, either specified for the facility or set using the
+CPWD command (see page 89).
<class>
is a sum of integers each representing a class of information as follows
(default 7):
•
1
voice (telephony)
•
2
data (refers to all bearer services)
•
7
all classes (default)
Table 3-9: Command Reference Table (ASCII Alphabetic)
Command Description