Sierra Wireless MP 700 Series, Справочник по командам

Страница: 105 / 118

Command Reference
Rev 3.2 Oct.05 103
V[<n>] (continued)
Verbose result code format (continued)
This command also affects framing of responses (see page 20 for details).
Settings for
<n>
are:
•
0
: Numeric result codes
•
1
: Verbose result codes (default)
Result codes
•
If
<n>=0
, the result code is
0
.
•
If
<n>=1
, the result code is
OK
. (The default.)
•
ERROR
or
4
results otherwise, depending on the current state (verbose or
not)
Z
Note: Additional
commands on the same
line are ignored.
Reset modem to user-defined profile
The modem disconnects any active call, and then resets the command and
register parameters to the defaults stored in the non-volatile memory’s user
profile by the
AT&W
command (see page 24).
Table 3-9: Command Reference Table (ASCII Alphabetic)
Command Description