Sierra Wireless MP 700 Series, Справочник по командам

Страница: 103 / 118

Command Reference
Rev 3.2 Oct.05 101
E[<n>]
Command echo mode
Controls echoing of characters received from the host back to the host when in
command state. This also affects framing of responses. (See “Response and
Result Framing” on page 20.)
n
may be one of two values:
•
0
: Disable echo
•
1
: Enable echo (Default)
H[0]
Note: The
0
parameter
(
ATH0
) is the only one
permitted. It is optional
and has no effect on the
command.
Hang up (disconnect)
GSM mode
When operating in GSM voice, or CSD mode,
ATH or ATH0
hangs up the call, disconnecting it. The modem goes from online condition to
offline condition.
GPRS mode
When operating in GPRS packet mode, the
ATH
on-hook
command may be used to reject a network request for PDP context activation
announced by the unsolicited result code
RING
.
The modem responds with
OK
. If there is no outstanding connection request,
the modem responds with
ERROR
.
Note: This is an extension to the usage of the
H
command from the V.25 ter
standard.
I[<value>]
Display product identification
Displays model and version information.
The <value> determines what information is displayed:
•
<value>=0
Manufacturer and model
•
<value>=4
Mobile ID used by the MT protocol. (See !MPMTCONF on
page 50.)
The Mobile ID is derived from the IMEI. (See +CGSN on
page 72.)
•
<value>=5
Firmware revision
•
<value>=6
Bootloader revision
L
(ignored)
Set speaker loudness
This command is provided for compatibility reasons; no action is taken by the
modem. Parameters are ignored.
M
(ignored)
Set speaker mode
This command is provided for compatibility reasons; no action is taken by the
modem. Parameters are ignored.
Table 3-9: Command Reference Table (ASCII Alphabetic)
Command Description