A.1.3: Update and Install a New Application
Rev 3 9/21/17
41
41110479
12.
When you’re ready to stop sending data:
# app stop redSensorToCloud
Note: redSensorToCloud automatically closes the data connection, so you do not need to use "cm data connect -1".
A.1.3 Update and Install a New Application
When you installed Legato, sample application files were also stored. In this section, you will build and then install
the "hello world" application on the target.
Build (compile) an application on the dev machine and install it on the target:
1.
On the dev machine, open a new terminal window.
2.
Configure the window for development:
$ cfglegato
3.
Change directory to the sample application directory for Hello World:
$ cd $LEGATO_ROOT/apps/sample/helloWorld
2 minutes interval
30 seconds interval
Sync status
