3.1: Install Drivers
Rev 3 9/21/17
10
41110479
3.1 Install Drivers
Your Windows computer requires drivers for your mangOH Red’s CF3 module. To download and install the drivers:
1.
Go to
http://mangoh.io/mangoh-red-resources-getting-started
2.
In the Getting Started with mangOH section, find and click Drivers for mangOH-compatible CF3 Modules. This
takes you to the drivers page on the Source.
3.
Click Download.
4.
Open the downloads folder.
5.
Run (double-click) GenericDriverSetup.exe and follow the prompts to install the drivers.
3.1.1 Install PuTTY terminal emulator
You need a terminal emulator to establish SSH connections to the mangOH Red:
1.
If you do not have a terminal emulator on your computer that supports SSH, go to
www.chiark.greenend.org.uk/~sgtatham/putty/latest
to download and install the PuTTY SSH client.
3.2 Hardware Setup
To set up the mangOH Red board:
1.
Remove the protective film from the dipswitches:
Note:
You must register on the Source for an account before you can download files.
Remove this film
