Sierra Wireless GL6100, Руководство пользователя

Страница: 69 / 96

WA_DEV_GL6100_PTS_001 Rev 002 May 24, 2010 69
13. Reliability Standards: Compliance
and Recommendations
13.1. Reliability Compliance
The GL61x0 is compliant with the following requirements:
Table 51: Standards Conformity for the GL61x0
Abbreviation Definition
IEC International Electro technical Commission
ISO International Organization for Standardization
13.2. Applicable Standards Listing
The table hereafter gives the basic list of standards applicable to the GL61x0.
Note: References to any features can be found from these standards.
Table 52: Applicable Standards and Requirements for the GL61x0
Document
Current
Version
Title
IEC6006826 7.0 Environmental testing - Part 2.6: Test FC: Sinusoidal Vibration.
IEC60068234 73
Basic environmental testing procedures part 2: Test FD: random vibration
wide band - general requirements.
Cancelled and replaced by
IEC60068-2-64 . For reference only.
IEC60068264 2.0
Environmental testing - part 2-64: Test FH: vibration, broadband random and
guidance.
IEC60068232 2.0
Basic environmental testing procedures - part 2: Test ED: (procedure 1)
Withdrawn & replaced by
IEC60068-2-31 . For reference only.
IEC60068231 2.0
Environmental testing part 2-31: Test EC: rough handling shocks, primarily
for equipment-type specimens.
IEC60068229 2.0
Basic environmental testing procedures - part 2: Test EB and guidance:
bump.
Withdrawn and replaced by
IEC60068-2-27 . For reference only.
IEC60068227 4.0 Environmental testing - part 2-27: Test EA and guidance: shock.
IEC60068214 6.0 Environmental testing - part 2-14: Test N: change of temperature.
IEC6006822 5.0 Environmental testing - part 2-2: Test B: dry heat.
IEC6006821 6.0 Environmental testing - part 2-1: Test A: cold.
IEC60068230 3.0
Environmental testing - part 2-30: Test DB: damp heat, cyclic (12 h + 12 h
cycle).
IEC6006823 69 w/A1
Basic environmental testing procedures part 2: Test CA: damp heat, steady
State.
Withdrawn and replaced by
IEC60068-2-78 . For reference only.
IEC60068278 1.0 Environmental testing part 2-78: Test CAB: damp heat, steady state.