Installation and Startup
Rev. 1 June 2019
17
41113042
Step 2—Mounting the RV55 Router
Warning:
This router is not intended for use close to the human body. Antennas should be at least
8 inches (20 cm) away from the operator.
Mount the router where:
•
There is easy access to the cables
•
Cables are not bent, constricted, close to high amperages or exposed to extreme
temperatures
•
The front panel LEDs are easily visible
•
There is adequate airflow
•
It is away from direct exposure to the elements, such as sun, rain, dust, etc.
•
It will not be hit or come into contact with people, cargo, tools, equipment, etc.
Mounting Brackets
The RV55 router comes with mounting screws. An optional DIN rail mounting bracket (P/N
6000659) is available from Sierra Wireless.
Flat Surface Mount
If you are mounting the RV55 router on a flat surface, use the mounting screws that come
with the router.
Figure 2-2: RV55 Router Mounting Hole Locations and Dimensions
6.5 mm
119 mm
106 mm
Mounting holes 5.5 mm in diameter
85 mm
28 mm
55 mm
Note: RV55 Wi-Fi model shown.
Mounting hole measurements are
the same for all RV55 models.
Use this unpainted mounting
hole to ground the RV55.