
WA_DEV_FEX20_UGD_002
Rev 002
April 26, 2010
83
10. Other Maintenance Options
10.1. Enabling/Disabling the Flash LED
The Fastrack Xtend has a red LED indicator that shows the status of the GSM network. It is possible
to disable this LED during Sleep mode in order to reduce power consumption. Using a communication
software such as HyperTerminal, enter:
AT+WHCNF=1,0
to deactivate Flash LED
AT+WHCNF=1,1
to activate Flash LED
Note:
You will need to restart the Fastrack Xtend for the new setting to take effect. Refer to document [7]
Firmware 7.4a
AT Commands Manual (Sierra Wireless Software Suite 2.31)/Firmware 7.4 AT
Commands Manual (Sierra Wireless Software Suite 2.30) for more information about
enabling/disabling Flash LED.
10.2. Firmware Upgrade Procedure
The firmware upgrade procedure is used to update the firmware embedded in the Fastrack Xtend.
This procedure consists of downloading the firmware into internal memories through the RS232 serial
link available on the 15-pin SUB-D serial connector.
Refer to document [15] Firmware Upgrade Procedure document for more information regarding this
procedure.
Содержание AirLink FXT Series
Страница 1: ...WA_DEV_FEX20_UGD_002 002 April 26 2010 AirLink FXT Series Fastrack Xtend User Guide...
Страница 136: ......