Sierra Wireless AirCard W801, Руководство пользователя, Страница: 24 / 164

18 Power Button
Turning Your Device Off
●
From the home page:
1.
Ensure you’re logged in to the home page.
2.
Click the Power Off button (below the Virtual Device).
●
From the Mini Window:
1.
Ensure you’re logged in to the home page.
2.
Click the
Power Off
button.
●
From the device:
䡲
Press and hold the power button for 2 seconds.
Note:
You can turn the device on only from the device itself.
Using the Power Button to Determine the Device State
The power button on the device also acts as an LED/status indicator, and may or may not be lit;
this indicates the power state of the device, as shown in the following table.
Power button
Description Your action
Not lit
●
The device is turned off, and may
or may not be charging.
●
To turn the device on, press and
hold the power button for two
seconds.
●
The device is turned on, but you
have turned off the LED.
●
Optionally, turn on the LED. See
“Enabling and Disabling the LED”
on page 77.
Lit, flashing (approximately
every 4 seconds)
The device is turned on, and the LED
is enabled.
No action required.
Lit, flashing (approximately
every 30 seconds)
The device is in standby (low power)
mode.
The following are off: LCD, Wi-Fi
radio, 3G/4G radios.
For more information, see “Standby
(Low Power) Mode” on page 43.
To exit standby mode:
䡵
Connect the Overdrive 3G/4G
Mobile Hotspot to the AC
charger or computer, through
the USB to Micro B cable.
— or —
Press the power button .