Sienna SureCare SGS-0308 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 12

Sienna SureCare SGS-0308 Скачать руководство пользователя страница 4

4) The Steamer

Hose protrudes from the base of the appliance and holds

the control handle and nozzle on its end. Avoid yanking on the hose
unnecessarily.

5) The On/Off

Switch can be pushed to turn the power on and off.

6) The Ready Light comes on when the appliance is power on .

7) The Water Bottle is filled with tape water and repositioned upside

down in the water reservoir of the base. Avoid spilling excess water
into the reservoir when filling as this could cause the steamer to
expel water from the nozzle. Do not substitute another water bottle
for the one that came with your unit.

8) The Steamer Base houses the reservoir, water bottle, and attaches

the hose and hanger rod.

9) The Casters are on the bottom of the unit for wheeling the appliance

around.

1) The Control Handle at the end of the

steamer hose sits just before the
nozzle. By grasping the control handle
you can aim the direction of the
steam released from the nozzle.

2) The Nozzle with its small hole openings

is at the end of the steamer hose.
Always sit the nozzle end of the hose
on the hanger rod for the hose when
not in use. Keep the nozzle pointed
upward and steam will rise from the
openings. Try not to point the nozzle
downwards so water does not condense
and drip from the nozzle.

3) The Hanger Rod has a convenient hook

shaped end for resting the nozzle end
of the steamer hose. It can be
extended and retracted by telescoping
the rod from its sleeve.

NOTE ON INSTRUCTIONS

The pole is adjustable by taking the pole
out and moving the split ring located on
the bottom rod section. (see page 3 for
further details on moving the split ring).

IDENTIFYING THE PARTS OF THE STEAMER

1

2

3

4

8

7

5

6

9

2

«
...
2
3
4
5
6
...
»

Содержание SureCare SGS-0308













Отзывы:

Нет отзывов