ASSEMBLY AND USE
1) Attach steamer head to body of the unit.
2) Secure steamer head with screw provided until fully tightened (use Philips
screwdriver.)
3) Push the steamer handle straight up by pressing on the folding handle button.
4) Set cloth pad on the floor with blue microfiber side down. Align self adhesive strips
at the bottom of steamer head with cloth pad. Place unit on top of cloth pad and
apply pressure to assure hold.
5) Push the water tank release lock backward to take out the water tank. Unscrew the
water tank cap and fill with cool tap water.
NOTE: The steamer does not require distilled water. Residents in areas with hard water
should used distilled water for better performance.
6) Twist the quick release cord wrap clockwise to un-wrap the power cord completely.
Hang the cord on the handle cord wrap for better use of the steamer when moving
and cleaning. Be sure to plug unit into a grounded outlet.
7) The LED will illuminate when the steamer is ready for cleaning (Dynamo only.)
4
