manualshive.com logo in svg

Sienna SSP-4015, Инструкция по эксплуатации, Страница: 9 / 16

Поделиться
Скачать
Sienna SSP-4015 Скачать руководство пользователя страница 9

9

Crotch Area- Place the inside of the crotch area on the 

board facing up.  Align with the slanted left side of the 

board. Press.

Legs- Place top of pant leg half way on the ironing board.  

Press front crease. Then, place bottom of the pant leg half 

way on the ironing board.  Allow the hem or cuff to hang 

off the end of the board. Press. Follow the same method for 

pressing back crease.

Note: The hems of the pants can be pressed by placing them both on the ironing board 

and applying a small amount of pressure.

Shirt and Blouses:
Yoke- Arrange the shoulders around the slanted left side of the board.  Let the collar 

hang off the edge. Press.
Cuffs- Place the cuffs and plackets around the edges of the ironing cushion. Arrange 

any pleats. Press.

Sleeves- Place the garment to the left side of the press 

with the collar towards you.  Place the 

fi

 rst sleeve on the 

ironing board with the curve of the garment 

fi

 tted to the 

slanted left side of the board (the second sleeve will lay in 

front of the press off the board). Press. Remove 

fi

 rst sleeve 

and place second sleeve on the board. Press.

Body- Put the sleeves together and fold the shirt in half.  Place it at the back of the 

ironing board away from you, extending the sleeves behind the board on the right.  Bring 

the shirt front with the buttons forward 

fi

 rst.  With your right hand, hold the collar so that 

the curved edge of the neck opening is 

fl

 at against the ironing board.  Do not release the 

collar until you have lowered the pressing plate. Press. Keep pulling the shirt forward until 

you have worked the whole way around.

Collar- Place the collar on the board, spray and press. Fold 

the collar in half, spray then press.
Shirt Tail- Button the garment and place shirt tail squarely 

on the ironing board. Press. Hang the shirt on a hanger, or 

fold it. It is a good idea to let it cool before folding. Use the 

ironing cushion to retouch any area.

Hint: Use this same procedure on other 

fi

 tted garments such as blouses, 

fi

 tted  shirts, 

jackets, etc.

T-shirt:
Place t-shirt 

fl

 at on the ironing board. Depending on shape, begin with the sleeves. 

Note: If your t-shirt has rhinestones or an application on it, press with decorated side 

Содержание SSP-4015

















Отзывы:

Нет отзывов