NOTE: The steamer does not require distilled water. Residents in areas with hard water
should use distilled water for better performance.
USE:
1) Before plugging in your steamer, unscrew the water tank cap (I). Use the refill cup (T)
and funnel (S) to fill water tank completely. Screw water tank cap (I) back onto the
steamer body (L) firmly.
2) Place desired attachment onto trigger handle (F). To switch attachments, press
attachment release button (C) to remove attachment pieces from trigger handle (F).
3) Plug in steamer and turn power on/off button (K) on. A red power light will illuminate
to indicate unit is working. Be sure desired attachments are already in place before you
turn on your steamer. Be sure steam trigger (D) is not locked while steamer is heating
up.
4) Upon initial use, press steam trigger (D) and aim steam/water into a sink. In order for
the unit to prime, it will need to push out any water that has been trapped in the hose
before it can begin to produce steam. Once steam begins spewing out, the steamer
will be ready to use.
5) The steam trigger (D) will immediately begin steaming in constant steam mode. To
stop emitting steam, slide trigger release switch (E).
6) When steamer stops emitting steam simply unplug the unit, wait for it to cool down
and refill the water tank with water.
NOTE: It is recommended that another high wattage appliance is not operated on the
same circuit to avoid a circuit overload.
WARNING: ON SURFACES THAT HAVE BEEN TREATED WITH WAX, THE WAX MAY
BE REMOVED BY THE HEAT AND STEAM ACTION. DO NOT USE ON UNSEALED WOOD
FLOORS OR LET UNIT STAND ON ANY WOOD FLOOR FOR AN EXTENDED PERIOD OF
TIME. THIS MAY CAUSE THE WOOD GRAIN TO RISE. IT IS RECOMMENDED THAT A
SECTION BE TESTED IN AN ISOLATED AREA OF THE FLOOR. IT IS ALSO RECOMMENDED
THAT YOU CHECK THE USE AND CARE INSTRUCTIONS FOR CLEANING FROM THE FLOOR
MANUFACTURER TO ENSURE STEAM CLEANING IS ACCEPTABLE FOR YOUR WAXED
SURFACE.
WARNING: NEVER RUN THE STEAMER WITHOUT WATER.
7) When you finish cleaning, unplug power cord from outlet then release pressure from
steamer. Be sure to empty water tank and carefully remove any accessories for drying.
7
