ASSEMBLY AND USE
Connector:
The connector (B) already comes attached to the triangle fabric brush head (P) and the
steamer head (A). To connect the parts together, match the flat side of the connector (B)
tip to the rectangular bump in the triangle fabric brush head (P) and steamer head (A).
Push the connector (B) all the way in and turn 180 degrees for a tight fit. (If you purchase
additional accessories, the connector will need to be used on other parts in the same
way.)
Extension Arm(s):
The extension arm (H) can be inserted into the trigger handle (F). You can attach the
angle concentrator (O), steamer head (A), or the triangle fabric brush head (P) to extend
your reach. To attach, press firmly on the purple button located on the trigger handle (F)
and insert into the hole at the end of the extension arm (H). To remove, press firmly on
purple button and pull out extension arm (H).
Floor Brush Head/Floor Cloth Pad:
Lay the floor cloth pad (M) on the ground. Lay steamer head (A) down on top of pad.
Press firmly.
o
180
5
