12) When steam mop stops emitting steam, simply refill the water tank, and continue steaming.
WARNING: NEVER RUN THE STEAM MOP WITHOUT WATER.
13) When you finish cleaning, unplug power cord from outlet. Be sure to empty water tank and
carefully remove cloth pad from steamer head. Store the unit upright in a dry area.
NOTE: Your floor will be slightly wet immediately after moping, this is normal. It will dry within 5
minutes. This is due to the cooling effect of steam.
CAUTION: The cloth pad may be very hot.
Carpet Glider
14) Lay carpet glider on the floor in an upright position with the rectangular flat surface facing
downward. Place steamer head on top of glider.
IMPORTANT: The carpet glider is not designed to be fixed to the steamer head for safety reasons
including preventing burns. It is designed for use on soft carpet areas only, not for hard floor
surfaces.
NOTE: The steam mop includes a 30 minute auto shutoff feature that meets the energy saving
requirements by the latest European ERP directive.
Plus (Accessory Kit)
7
