9
4) FIXING THE HOTPLATE
The hotplate has a special seal which prevents
liquid from getting into the cabinet. Strictly comply
with the following instructions in order to correctly
apply this seal:
- Take off all the movable parts of the hob.
- Cut the seal in 4 parts of the necessary length to
positionning it on the 4 edges of the glass.
- Overturn the hotplate and correctly position seal
“E” (fig. 5) under the edge of the hotplate itself,
so that the outer side of the seal perfectly
matches the outer edge of the hotplate. The
ends of the strips must fit together without
overlapping.
- Evenly and securely fix the seal to the hotplate,
pressing into place with the fingers and remove
the strip of protective paper from the seal and set
the plate into the hole made in the cabinet.
- Position the hob in the hole in the unit and fasten it in
place using the appropriate screws “F” and the
fastening hooks “G” (fig. 6).
- When the appliance is installed so that the base
can be touched, we recommend fitting a
protecting shield.
This shield must be at least
70 mm below the base of the bench top (fig. 4
).
Timber or other suitable material may be used
provided it is capable of withstanding the
appliance temperatures. Ensure that the supply
connection point is accessible with the appliance
installed. To facilitate shield may need to be
removable.
NOTE: do not fix the hotplate into the bench
with sealant (ie silicon) as this may void the
warranty. Use only the seals provided.
INSTALLATION
FIG. 5
FIG. 6
FIG. 4/A
IMPORTANT: a perfect installation,
adjustment or transformation of the cook top
to use other gases requires a QUALIFIED
INSTALLER: a failure to follow this rule will
void the warranty.
Caution: Do not allow the glass (A)
lay directly on the work top. it is the
bottomshelf (B) that has to be in
touch with the work top (see
fig. 4/A).
COMPLY WITH THE DIMENSIONS (in mm)
A
B
C
D
E
F
4F (60)
553
473
63.5
63.5
175 min.
70 min.
5F (70)
645
475
63.5
63.5
173.5 min.
70 min.
5F (90)
833
475
62.5
62.5
73.5 min.
70 min.