Sienna ES60GFDBL Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 16

Sienna ES60GFDBL Скачать руководство пользователя страница 8

8

INSTALLATION

FIG. 4

TECHNICAL INFORMATION

FOR THE INSTALLER

This appliance shall be installed only by authorised
personnel  and  in  accordance  with  the
manufacturer’s installation instructions, local gas
fitting regulations, municipal codes, electrical wiring
regulations, AS/NZS 5601- Gas Installation and any
other statutory regulations. Ventilation must be in
accordance with  AS/NZS 5601 - Gas installation. In
general,  the  appliance  should  have  adequate
ventilation  for  complete  combustion  of  gas,
proper  flueing  and  to  maintain  temperature  of
immediate surroundings safe limits.
The wall and bench surfaces must be capable of
sustaining temperatures of 75 °C. All laminates,
fixing  adhesive  and  surfacing  materials  should
be certified suitable for this temperature.

3) INSTALLING THE HOTPLATE

Check that the appliance is in a good condition after
having removed the outer packaging and internal
wrappings from around the various loose parts. In
case of doubt, do not use the appliance and contact
qualified personnel.

Never leave the packaging materials (cardboard,
bags, polystyrene foam, nails, etc.) within
children’s reach since they could become
potential sources of danger.

The measurements of the opening made in the top of
the modular cabinet and into which the hotplate will be
installed are indicated in either fig. 4. Always comply
with the measurements given for the hole into which
the appliance will be recessed (see fig. 4-4/a).

The  appliance  belongs  to  class  3  and  is
therefore  subject  to  all  the  provisions
established  by  the  provisions  governing  such
appliances.

Any adjoining wall surface situated within 200 mm from
the edge of any hob burner must be a suitable non-
combustible material for a height of 150 mm for the entire
length of the hob. Any combustible construction above
the hotplate must be at least 650 mm above the top of
the burner and no construction shall be within 450 mm
above the top of the burner. A minimum depth of 70 mm
from the top of the worktop surface must be provided for
the appliance.

CAUTION:
the  installer  shall  test  the  appliance
before  leaving.  Test  the  safety
operation  of  the  ignition  system  on  all
burners individually and combined.

FIG. 4/a

Mod.:

ES60GFDBL

Mod.:

ES700GFDBL

Mod.:

ES90WGFDBL

FIG.4/A

FIG.4/A

FIG.4/C

«
...
6
7
8
9
10
...
»

Содержание ES60GFDBL

















Отзывы:

Нет отзывов