Sienna ES60GFDBL Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 16

Sienna ES60GFDBL Скачать руководство пользователя страница 10

10

5) GAS CONNECTION

The gas connection is located in the rear and on
the right hand underside of these appliances:

24 mm

(

mod

:

ES60GFDBL),

144 mm (mod:ES700GFDBL),
230 mm (mod: ES90WGFDBL).

There are two ways to carry out the connection to
the main gas line:

A.

The hotplate can be connected with rigid pipe

as specified in AS/NZS 5601.

B.

If installing with a hose assembly, install with a

hose  assembly  that  complies  with AS/ANZ  1869
(Australian  Certified),  10  mm  ID,  class  B  or  D,  no
more  than  1.2  m  long  and  in  accordance  with
AS/NZS  5601.  Ensure  that  the  hose  does  not
contact  the  hot  surfaces  of  the  hotplate,  oven,
dishwasher  or  any  other  appliance  that  may  be
installed  underneath  or  next  to  the  hotplate.  The
hose should not be subjected to abrasion, kinking
or  permanent  deformation  and  should  be  able  to
be  inspected  along  its  entire  length  with  the
hotplate in the installed position.
Unions  compatible  with  the  hose  fittings  must  be
used and all connections tested for gas leaks.
The  gas  supply  connection  point  must  be
accessible with the appliance installed..

Warning:

ensure that the hose assembly is

restrained from accidental contact with the flue or
flue outlet of an underbench oven.

Natural Gas

Natural Gas installations require the connection of
a  gas  regulator  at  the  appliance. This  regulator  is
supplied with the appliance on purchase.
Assemble  the  regulator  (noting  the  gas  flow
direction)  and  transition  pieces  (supplied  with  the
appliance), in accordance with figure 7.

The transition piece on the supply side of the
regulator must be provided by the installer.

Liquified Petroleum Gas.

In  a  Universal  LP  Gas  installation  the  gas
regulation  is  made  at  the  gas  cylinder  and
regulation  at  the  appliance  is  not  required.  To
connect  supply  to  the  appliance  use  transition
pieces

as

shown

in

figure 8. These pieces are supplied with the
appliance on purchase.

WARNING:
THE BURNER FLAME MUST BE ADJUSTED BY
THE INSTALLER.
FAULTY  INSTALLATION  WILL  NOT  BE
COVERED UNDER WARRANTY.
THE  APPLIANCE  IS  FACTORY  SET  FOR
NATURAL  GAS.  THE  TEST  POINT  PRESSURE
SHOULD  BE  ADJUSTED  TO  1.00kPa  WITH  THE
WOK BURNER OPERATING AT MAXIMUM.

INSTALLATION

FIG. 7

FIG. 8

«
...
8
9
10
11
12
...
»

Содержание ES60GFDBL

















Отзывы:

Нет отзывов