14
English
ATTACHING THE CLEANING CLOTH
The cleaning cloth is pulled over the wide nozzle attachment. The cleaning cloth absorbs excess
moisture and reduces the production of water marks. It is therefore ideally suited both for steampressing
fabrics (e.g. curtains or clothing) and for cleaning upholstered furniture. Attach the cleaning
cloth to the wide nozzle attachment as follows:
1. Simply pull the cleaning cloth over the wide nozzle attachment.
2. Then place the wide nozzle attachment onto one of the adapters and attach the adapter or
the extension hose to the hand steam cleaner.
FILLING THE WATER RESERVOIR
To ensure that your device can be used for a long time, we recommend that you use distilled
water. However, the device can also be operated using normal tap water.
The device has a water reservoir for generating steam. This water reservoir needs to be topped up
regularly, depending on how much you use it. The device cannot be operated without a sufficient
quantity of water in the water reservoir.
1. Place the hand steam cleaner on a flat surface.
2. Make sure that the hand steam cleaner is switched off and the mains plug is not connected to
a plug socket.
3. Unscrew the water reservoir cap.
4. Fill the measuring cup with cold, clean water and fill the water reservoir with it.
5. Then seal the water reservoir shut with the water reservoir cap.
USING THE HAND STEAM CLEANER
1. Pour water into the water reservoir (see the “Filling the Water Reservoir” section).
2. Select a cleaning attachment and attach it to the hand .team cleaner using the adapter (see from
the “Attaching the Adapter” chapter to the “Attaching the Cleaning Cloth” chapter).
3. Connect the hand steam cleaner to a mains socket that has been properly installed.
4. Switch on the device with the on/off switch and allow the device to heat up.
5. Direct the hand steam cleaner towards the surface which you want to clean. Always hold the device
horizontally when you do this.
6. Press the steam release button to emit steam. When you let go of the steam release button, no
more steam is produced.
7. When you ...
• … use the nylon brushes. you can loosen dirt with the aid of the steam and also remove more
stubborn dirt by rubbing with the brush.
• ... use the wide nozzle with the squeegee, you can first apply steam to smooth surfaces such as
mirrors er glass surfaces from a short distance away and then wipe off the damp surface with
the rubber lip.
• ... use the wide nozzle with the cleaning cloth. you can move the cloth directly over the spot
which is to be cleaned in order to remove dirt. You can also use the wide nozzle and the cleaning
cloth to steam-press item of clothing or curtains etc. Hang them up before you start and
then move the cleaning cloth over the fabrics which are to be pressed.
8. After cleaning switch off the device, pull the mains plug out of the socket and allow the device to
cool down before you store it away.
