12
English
intermediate piece as far as it will go so that no steam can escape through a gap between the
cleaning attachment and adapter or the intermediate piece!
• Danger of scalding! Never change an attachment while the hand steam cleaner is still
emittingsteam.
• Check whether the cleaning cloth shows any signs of wear each time before you use it. Do not
use it if it shows any signs of wear or if it is damaged! The surfaces which you want to clean with it
could be damaged!
• Danger of scalding! Be careful if you want to reclean dirty spots with a cloth after they have been
steam-cleaned. The surfaces may still be hot!
• Never use the hand steam cleaner to press clothing if this clothing is still being worn by a person!
Always hang up clothing on a coat hanger or something similar belore you steampress it!
• Never direct the steam at the same spot continuously for longer than 10 seconds.
• Never use the device with an empty water reservoir! This may damage the device. You should
regularly refill the water reservoir during use.
• Do not overfill the water reservoir! We recommend that you do not pour more than 220 ml of
water into the water reservoir.
• Never pour any cleaning agent or additives into the device. This could destroy the device and safe
working is no longer guaranteed.
• Shortly after use, the attachments used may still be very hot. You should therefore wait for a few
minutes until they have completely cooled down before you detach them.
ATTACHING THE ADAPTER
To attach a cleaning attachment to the hand steam cleaner, you must first place the short adapter or the
adapter with the extension hose onto the device. To do so, perform the following steps:
1.
Attach the short adapter or the extension hose with the adapter
to the device (see picture).
2.
Turn the short adapter or the extension hose clockwise until it
engages and cannot be turned any further.
