Installation and connection
en
37
Installing the appliance on
a base or on a wooden joist
ceiling
:
Warning
The appliance may be damaged!
The washing machine may wander
during the spin cycle and topple/fall off
the base.
Always secure the washing machine
feet with fixing brackets.
Holding brackets: order no. WMZ
20490, WZ20490.
Note:
If installing on a wooden joist
ceiling:
■
If possible, install the washing
machine in a corner.
■
Screw a water-resistant wooden
panel (min. 30 mm thick) to the floor.
Installing the appliance under/
between kitchen units
:
Warning
Danger of death from electric shock!
Danger of death if live parts are
touched.
The appliance cover plate must not be
removed.
Build under/build in before connection
to the power supply.
Removing the transportation
protection devices
Caution!
The appliance may be damaged!
Transit bolts which have not been
removed may damage e.g. the drum
while the washing machine is running.
Before using the appliance for the first
time, remove the 4 transportation
protection devices completely and keep
in a safe place.
Caution!
The appliance may be damaged!
To prevent damage in transit when
transporting the appliance
subsequently, always re-install the
transit bolts prior to transportation.
Keep screw and sleeve screwed
together.
1.
Take the hoses out of the holders.
2.
Take hoses out of the elbow and
remove elbow.
3.
Loosen and remove all
4 transportation lock screws.
4.
Take the power cord out of the
holders. Remove sleeves.
5.
Insert covers. Lock firmly by
pressing on the locking hook.