Faults and what to do about them
en
31
5.
Clean the filter:
Disconnect the hose from the water
tap.
Clean filter with small brush.
and/or for standard and Aqua-
Secure models:
Remove hose from the rear of the
appliance.
Take out filter with pliers and clean.
6.
Connect the hose and check for
leaks.
Air filter blocked
1.
Turn the programme selector to
Off
.
Pull out the mains plug.
2.
Open and remove the service flap.
3.
Take out air filter.
4.
Rinse fluff off the air filter using
a brush under running water.
5.
Re-insert air filter.
6.
Re-insert and close service flap.
3
Faults and what to do
about them
Faults and what to do about them
Emergency release, e.g. if a
power failure occurs
The programme continues running
when the power supply is restored. If
the laundry is still to be removed, the
door can be opened as described
below:
:
Warning
Risk of scalding!
When washing at high temperatures,
you may be scalded if you touch hot
washing water or the laundry.
If required, leave to cool down.
:
Warning
Risk of injury!
If you reach into the rotating drum, you
may injure your hands.
Do not reach into the rotating drum.
Wait until the drum stops rotating.
Caution!
Water damage
Leaking water may cause damage.
Do not open the door if you can still see
water through the glass.
1.
Turn the programme selector to
$
Off
. Pull out the mains plug.
2.
Drain the detergent solution.
