en
Installation and connection
40
:
Warning
Risk of scalding!
During the drying phase, warm air is
emitted at a temperature of
up to 60 °C.
Notes
■
Required dimensions:
a = 650 mm
b = 620 mm
c = 850 mm
■
Only install the washer dryer under a
continuous worktop connected firmly
to the adjacent cupboards.
■
Ventilate the installation area well,
otherwise the optimum drying results
will not be achieved. Dimensions of
the ventilation openings (to be
provided on one side, depending on
the circumstances). Opening cross-
section: d x e = 200 mm x 100 mm.
Height above floor: f = 365 mm.
Distance between wall and
appliance: 50 mm.
Removing the transportation
protection devices
Caution!
Damage to the appliance
■
Before using the washer dryer for the
first time, it is essential to remove all
4 transportation protection devices.
Keep the transportation protection
devices. The washer dryer is
secured for transportation with
transportation protection devices.
Transportation protection devices
which have not been removed may
damage the drum, for example,
while the washer dryer is running.
■
To prevent damage in transit when
transporting the appliance at a later
date, always re-install the
transportation protection devices
prior to transportation
Keep the screw and sleeve screwed
together.
1.
Take the hoses out of the holders.
2.
Take hoses out of the elbow and
remove the elbow.
3.
Loosen and remove all
4 transportation lock screws.
4.
Take the power cord out of the
holders. Remove the sleeves.
5.
Insert the covers. Lock firmly by
pressing on the locking hook. Insert
the hose holder.
D
E
F
I
G
H
