manualshive.com logo in svg

Siemens WW8000 MP4.70, Техническое руководство

Поделиться
Скачать
Siemens WW8000 MP4.70 Скачать руководство пользователя страница 44

Getting started 

5 

Launching Composer 

44 
Building Technologies 

 

A6V10062401_a_en

Fire Safety & Security Products 

 

30.09.2014

-  You can enter the name of an existing project that you want to replace with 

the new one. You will be asked to confirm you want to overwrite the file; 

select Yes to proceed. 

5.  Click OK. 

Technical notes 

  Projects can take quite a bit of space on the hard disk. Therefore, it is not 

recommended that you create multiple copies of the same project. If you wish 

to save a particular project configuration for later use, you can do this using the 

backup function [➙ 85]. 

  Older version of Composer (e.g., MP3.15 and earlier) will show a different 

welcome window. Please refer to the previous editions of this guide. 

5.1.1.2

 

Opening an existing project 

Composer allows you to open 

previous project versions. 

The project version displays in the Projects Management window next to each 

project name. 
Different versions of a project are handled by Composer by two ways: 

  For projects version MP4.30 and later, you are permitted to 

save the project in 

the older version.  

  Projects version MP3.15, MP3.20, MP4.10, MP4.15, and MP4.20 are 

automatically updated (with the exception of very old versions listed in the 

DMS8000 products Release Notes). 

Opening a project version with optional update 

When Composer opens a project that can be handled without version update, the 

following window displays: 

 

Open Project window with optional update to current version 

 
You can select how you want Composer to handle the project, whether you want to 

update it to a newer version or keep it as it is. Obviously, the decision depends on 

which DMS8000 product version will be running this project on site. 

  If you keep the original version, you can modify the project, save it, and then 

restoring it on a system that runs the same version. 

  If you choose to update the project to latest version and then confirm this 

decision when prompted, the project is automatically converted (note that this 

procedure may take a few minutes) and then opened. At this point, you cannot 

undo this update and can only run the project on DMS8000 systems equipped 

with the corresponding updated version.  

Please refer to the latest DMS8000 products 

Release Notes for detailed 

instructions on how to migrate from earlier versions. 

If you choose to update, the following message displays: 

Содержание WW8000 MP4.70































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды