en
Appliance settings
30
Basic settings
You can adjust certain basic settings on
the appliance. To make adjustments,
you first need to
call up the setting
mode
:
1.
Set the programme to the
(
position.
2.
Press
ü
Drying Aim
and, at the
same time:
3.
Set the programme to the
0
position.
4.
Release
ü
Drying Aim
.
Setting mode is now activated.
The basic settings are assigned to the
following programme positions:
--------
Settings:
Adjust and activate/deactivate the
basic settings as follows
1.
Position of the required basic
setting.
2.
Change the setting using:
M
N
3.
Adjust any additional basic settings
you require or save and exit the
basic settings.
Save and exit the basic settings as
follows
Switch off the appliance.
Note:
The selected settings are
retained even after the appliance has
been switched off.
#
+
3
;
#
+
3
;
Position
Basic setting
0
Adjust the volume of the audible
notification signals (e.g. at the end
of a programme).
8
Adjust the volume of the audible
operating signals.
0
Off
1
Low
2
Medium
3
High
4
Very high
#
+
3
;
