Home Connect
en
37
Resetting your network
settings
You can reset all of the network
settings.
Ensure that you are in the Home
Connect menu.
1.
Set the programme to position 5.
§“à
(reset network settings)
appears in the display.
2.
Press
Start/Reload
‹
.
¢“à
appears in the display.
3.
Press
Start/Reload
‹
.
Note:
If you want to operate your
appliance via the Home Connect app
again, you will need to reconnect it to
your home network and to the
Home Connect app.
Updating the software
You can update the Home Connect
software on your appliance. As soon as
a new software update is available, a
note appears in the display:
—˜š
Install the update directly via the
message in the display
or
manually
as
follows:
Ensure that you are in the Home
1.
Set the programme to position 6.
—˜š
(update) appears in the display.
Start/Reload
‹
flashes if a software
update is available.
2.
Press
Start/Reload
‹
.
¢“à
appears in the display.
3.
Press
Start/Reload
‹
.
Note:
The software update may take
several minutes. Do not switch the
appliance off while updates are being
installed.
#
+
3
;
#
+
3
;