Siemens WT47X940EU, Инструкция по установке и эксплуатации, Страница: 38 / 76

en
Appliance settings
38
2
Appliance settings
Appliance settings
You can activate/deactivate the
following appliance settings directly or
change further appliance settings
under
à
.
1.
Switch on the appliance.
2.
Press
c
or press and hold
c
and
swipe upwards.
A menu is displayed.
Childproof lock
You can activate or deactivate the
appliance's childproof lock. You can
activate the childproof lock to prevent
the control panel from accidentally
being operated.
Activate the appliance setting as
follows:
Press
w
.
The childproof lock is activated.
Notes
■
You can activate the childproof lock
at any time after you switch on the
appliance.
■
The childproof lock also remains
activated when the appliance is in
standby mode. In order to be able to
operate the control panel after the
appliance is switched on, you must
deactivate the childproof lock.
Deactivate the appliance setting as
follows:
1.
Press anywhere on the display.
A message appears in the display.
2.
Press and hold
Deactivate child
lock
for three seconds.
The childproof lock is deactivated.
Tones
You can activate or deactivate the
appliance's signal tones. If you
deactivate the signal tones, operate the
appliance without operating and
information signals.
Activate/deactivate the appliance
setting as follows:
Press
C
/
D
.
The signal tones are activated/
deactivated.
Other appliance settings
You can activate/deactivate or adjust
further appliance settings under
à
.
1.
Press
à
.
2.
Swipe until the require setting
appears.