Cleaning
en
39
9.
Press the Start button.
The appliance care programme will start
and an audible signal will sound.
Once the appliance care programme
has ended,
“Ÿš
will appear on the
display panel and an audible signal will
sound.
10.
Pull out the condensation container.
11.
Empty the condensation container,
reinsert it fully and switch off the
dryer.
You have now completed the appliance
care programme.
Intensive appliance care
programme
Before leaving your dryer unused for an
extended period, e.g. before going on
holiday, you should run the intensive
appliance care programme. This
prevents unpleasant odours from
building up in the appliance.
Notes
■
The intensive appliance care
programme runs for approximately 4
hours. During this time, there are a
few things you will need to do. Do
not cancel the programme once it
has started. Please bear this in mind
before you start up the intensive
appliance care programme.
■
When you run the intensive
appliance care programme, you will
need to use an appliance care
product. This can be ordered from
our after-sales service using spare
part number
00311829
.
Contact information for all countries
can be found in the enclosed after-
sales service directory.
Caution!
Material damage/damage to the
appliance
■
If you pour the wrong quantity of
detergent or cleaning agent into the
appliance, this may result in material
damage or damage to the
appliance.
Use detergents/care products/
cleaning agents and softeners in
accordance with the manufacturers'
instructions.
Material damage/damage to the appliance
■
Boiling water may damage the
appliance and the condensation
container. Do not pour boiling water
into the condensation container.
To start the appliance care programme:
1.
Switch the appliance on if it is off.
2.
Remove all items of laundry.
3.
Select the programme in position 1.
4.
Touch and hold the Iron Dry
S
button, and select the programme in
position 4.
’˜‚
and the programme length will
now alternate on the display panel.
