en
Operating the appliance
26
3.
If required, select a different
programme or a different
Note:
Do not change the
programme during the CoolDown
process.
4.
Close the appliance door.
5.
Press
‹
inicio/pausa+carga
(Start/
Reload).
Note:
The programme duration is
updated on the display, depending on
the load and on the residual moisture in
the laundry. The values displayed may
change when the programme or load is
changed.
Cancelling the programme
The programme can be cancelled at
any time by opening the door or
pressing
‹
inicio/pausa+carga
(Start/
Reload).
Caution!
Risk of fire. Laundry may catch fire.
If you cancel the programme, remove all
items of laundry from the dryer and
spread them out to allow the heat to
dissipate.
End of programme
The following message appears in the
display:
“Ÿš
Removing laundry and
switching off the appliance
1.
Remove the laundry.
2.
Turn the programme selector to
switch off the appliance.
Emptying the condensation
container
By default, the condensation from the
appliance runs into the condensation
container.
Alternatively, you have the option of
discharging the condensation water
*
supplied depending on the model. If you
choose to discharge the condensation
water into the waste-water system, you
will not need to empty the condensation
container during the drying programme
or after each time you use the dryer.
* into the waste-water system via a
drain hose