Siemens WT43H0C5DN, Руководство пользователя и инструкции по установке

Страница: 28 / 44

en
operation
28
4.
Use a soft brush to clean the heat
exchanger cover.
Make sure that you remove all dirt
from the seal.
5.
Clean the filter mat thoroughly un-
der warm, running water and
squeeze it out by hand.
You can remove heavy soiling
carefully using a vacuum cleaner.
Do not clean the filter mat using
cleaning products.
6.
Push the filter mat onto the retain-
ers.
Ensure that the cleaned filter mat
is not deformed, damaged or in-
verted when you push it onto the
retainers.
Note:
You can order the filter mat
→ Page 23 as a spare part from
customer service.
7.
Close the base unit → Page 33 .
12.12 Condensation con-
tainer
Condensation forms during drying,
which your appliance uses for auto-
matic cleaning. By default, the con-
densation is collected in the appli-
ance's condensation container.
Emptying the condensation
container
If the drying programme has finished
or the display shows a notification
while the appliance is in operation,
empty the condensation container.
Requirements
¡
The display shows the following
after drying: "End"
¡
or during operation: ⁠ .