manualshive.com logo in svg

Siemens WS12K261BY, Инструкция по эксплуатации и руководство по установке, Страница: 33 / 40

Поделиться
Скачать
Siemens WS12K261BY Скачать руководство пользователя страница 33

Positioning and connecting       

en

33

4.

Remove the mains cable from the 

holders. Remove sleeves.

5.

Insert covers.

Note:  

Lock the covers firmly in 

place by applying pressure to the 

snap-in hooks.

Hose and cable lengths

Connection on left side

or

Connection on right side

Note:  

If the hose holders are used, the 

possible hose lengths are reduced!

Tip:  

The following are available from 

specialist dealers/after-sales service:

■

Extension for Aqua-Stop or cold 

water inlet hose (approx. 2.50 m). 

Order no. WZ10130

■

A longer supply hose (approx. 2.20 

m) for standard model.

Water connection

:

Warning

Risk of electric shock!

Danger of death if live parts are coming 

into contact with water.

Do not immerse Aqua-Stop safety 

device in water (contains an electric 

valve).

Caution!

Water damage

The connection points for the water 

supply hose and water drain hose are 

under high water pressure. To prevent 

leaks and water damage, you must 

follow the instructions in this section.

aFP

aFP

aFPaFP

aFP

aFP

aFPaFP

PD[
FP

PLQ
FP

Содержание WS12K261BY









































Отзывы:

Нет отзывов