Operating the appliance
en
13
1
Operating the
appliance
Operating the appliance
Note:
Install
and
connect
washing
machine properly.
Before the 1st wash, wash once
without
Preparing the washing
machine
Notes
■
Never switch on a damaged
washing machine!
■
Inform customer service!
1.
Connect the mains plug.
2.
Turn on the tap.
3.
Open the door.
4.
Check that the drum is completely
emptied. Empty if necessary.
Select programme/switch on
the appliance
Use the programme selector to select
the required programme. Can be
rotated in both directions.
The washing machine is switched on.
Select additional programme
settings
By selecting additional settings, you can
better adapt the washing process to
your items of laundry.
The settings can be selected or
deselected depending on the
programme progress.
The indicator lamp for the button lights
up if a setting is active. The settings are
not saved when the appliance is
switched off.
Additional programme settings
Placing laundry into the drum
:
Warning
Risk to life!
Items of laundry pretreated with
cleaning agents that contain solvents,
e.g. stain remover/cleaning solvent,
may cause an explosion after being
loaded into the washing machine.
Hand-rinse these items of laundry
thoroughly beforehand.
Notes
■
Mix items of washing of varying
sizes. Laundry items of different
sizes distribute themselves better
during the spin cycle. Individual
laundry items may cause an
unbalanced load.
■
Observe the maximum indicated
load. Overfilling adversely affects the
washing result and encourages
creasing.
1.
Unfold presorted laundry items and
place them in the washing drum.
2.
Ensure that no items of laundry are
trapped between the door and
rubber seal.
