Siemens WQ33G2D1NL Скачать руководство пользователя

Страница: 11 / 52

Avoid material damageNL

Foam or foam rubber may warp or

melt when dried.

▶

Do not dry foam or foam rubber

laundry.

Unsuitable cleaning agents can

damage the surfaces of the device.

▶

Do not use sharp or abrasive

cleaning agents.

▶

Do not use strongly alcoholic

cleaning agents.

▶

Do not use hard scouring or

dishwashing sponges.

▶

Clean the device only with water

and a soft, damp cloth.

▶

Remove all detergent residues,

spray mist or residues immediately

upon contact with the appliance.

2 Material damage

avoid

Follow this instruction to avoid

material damage and damage to the

device.

PAY ATTENTION!

Incorrect dosage of fabric softeners,

detergents, care products and

cleaning agents can affect the

functioning of the appliance.

▶

Follow the manufacturer's dosing

recommendations.

Exceeding the maximum load

quantity affects the operation of the

appliance.

▶

Observe and do not exceed the

maximum load for each

programme.

→

†Programs", Page 26

Overheating of the device can affect

the operation of the device.

▶

Keep the air inlet of the device

clear during operation.

▶

Provide adequate ventilation in

the room.

Light objects, such as hair and fluff,

can be drawn into the air inlet of the

device during operation and affect the

function of the device.

▶

Keep the environment clean while

using the device.

▶

Keep light objects away from the

device.

Operation with a missing, incomplete

or defective fluff guard (depending on

the appliance equipment, e.g. fluff

filter, fluff container, filter mat) can

lead to damage to the appliance.

▶

Do not use the appliance with a

missing, incomplete or defective

fluff guard.

3 Environmental protection and

savings

3.1 Disposal of the packaging

The packaging materials are

environmentally friendly and can be

reused.

▶

Dispose of the individual components

separately according to type.

3.2 Saving energy

If you follow these directions, your

device will use less power.

Operate the device in a well-

ventilated area and keep the air inlet

of the device clear.

aA hindered air exchange

extends the program duration and

increases energy consumption.

Содержание WQ33G2D1NL





















































Результаты поиска

Содержание WQ33G2D1NL

Отзывы:

Похожие инструкции для WQ33G2D1NL

Бренды по названию

Популярные бренды

Siemens WQ33G2D1NL, Руководство пользователя

Результаты поиска

Содержание WQ33G2D1NL

Отзывы:

Похожие инструкции для WQ33G2D1NL

Бренды по названию

Популярные бренды