Siemens WN44A100IN Скачать руководство пользователя страница 35

Страница: 35 / 52

Operating the appliance

Operating the

appliance

Operating the appliance

Preparing the appliance

The appliance was tested before

delivery. To remove residual water from

the test procedure, the first wash cycle

should be run without laundry using the

Drum Clean

programme.

"Before washing for the first time"

on page 20

Notes

■

Never switch on a damaged

appliance!

■

Inform customer service!

Insert mains plug.

Warning

Risk of death from electric shock!

Risk of death if live parts are

touched.

– Never pull out the mains plug by

tugging the power cord.

– Insert/pull out the mains plug

with dry hands only.

Turn the water tap on.

Open the appliance door.

Select programme/switch on

the appliance

Note:

If you have activated the

childproof lock, you must first deactivate

it before you can set a programme.

Use the programme selector to select

the required programme. The

programme selector can be rotated in

either direction.
The appliance is switched on.

The

programme default settings

for the

selected programme alternately appear

in the display panel:

■

The maximum load and

■

the duration of the programme and

■

...

Adjusting the selected

programme

Changing default settings

You can use the displayed default

settings or adjust the selected

programme by touching the relative

buttons to fit the laundry care needs.

e.g.

Temp. °C

Spin Speed

Ready In

Note:

The buttons are sensitive, they

only need to be touched gently. If the

button

Temp. °C

Spin Speed

Ready

is held down, the setting options are

automatically scrolled through.

Содержание WN44A100IN





















































Результаты поиска

Содержание WN44A100IN

Отзывы:

Похожие инструкции для WN44A100IN

Бренды по названию

Популярные бренды

Siemens WN44A100IN, Инструкция по эксплуатации и руководство по установке

Результаты поиска

Содержание WN44A100IN

Отзывы:

Похожие инструкции для WN44A100IN

Бренды по названию

Популярные бренды